Please click Live Help if we are offline to send inquiry or question.
Drainage & Coating Products
Information
|
 |
Hydrotech carries a unique line of electronic sump pump, utility pump, and sewage pump switches designed for improved reliability and perfomance. These smart electronic pump switches do not fail or jam like conventional mechanical switches. These sump pump and utility pump switches offer intelligent pump control, lifetime warranty, and pump and flood alarms.
For the basement and crawl spaces, we have 4 different models of HydroTech Electronic Pump Switches, one to fit your exact needs. All of them are easy to install, and you won't need a plumber to do it. And they work with any brand of pump: StormPro, Flotec, Simer, Wayne, Rigid, etc. We have switches for sump pumps, utility pumps, sewage and ejector pumps, and a Hi-Lo switch for those unusual applications.
For the laundry room we have the WasherWatcher, which will prevent the utility tub from overflowing and flooding the laundry room and everything around it, and below it.
For the kitchen we have the WaterWatcher, which can shut off the dishwasher or any other appliance if it begins to leak.
Search Results
Found 6 product(s) for Smart Intelligent Electronic Pump Switches & Alarm (1-6 of 6)
|
Smart Intelligent Electronic Pump Switches & Alarm
|
|
Model HC8000 Sump Pump Switch
The Hydrotech HC8000 pump switch is designed to work in typical sump pits that collect ground water from the drain tiles around your home's foundation. It is very simple to install and is fully automatic so it doesn't require any complicated setup.
PRICE: $59.99
|
|
Model HC7000 Electronic Utility Pump Switch
Hydrotech's Utlity Pump Switches are "electronic float" switches designed to work in with utility pumps in ponding, or puddling, types of applications. In these applications the water isn't collected in a pit, but gathers in a low spot in the basement usually from seepage or backed up sewers during heavy rains.
PRICE: $59.99
|
|
Model HC6000 Hi-Lo Pump Switch
The HydroTech Model HC6000 Hi-Lo Pump Switches are "electronic float" switches that are designed to work in sump pits that collect ground water from around the home's foundation.
PRICE: $64.99
|
| |
|
Model HC5000 Sewage Pump switch
Model HC5000 Sewage Pump switch
PRICE: $61.99
|
|
Model HC4000 Tank Level Controller
The HC4000 Tank Level Controller is designed to control the level of water in a tank between maximum and minimum levels. This type of control is useful in maintaining water levels in aquariums, landscaping ponds, waterfalls, water sculptures, etc.
PRICE: $64.99
|
|
Water Watcher
The WaterWatcher is versatile in its ability to prevent water disasters. Its floor sensor is very sensitive and can detect many types of liquid (soap, pop, milk, even the purest of water).
PRICE: $67.95
|
| |
| |
Which
Electronic Pump Switch Is Right For You? |
Application |
Product |
Comments |
Sump pump in ground
water or gray water pit |
HC8000
Electronic Sump Pump Switch |
Set sensor so pit takes no longer than 90 seconds to empty during heaviest rainfall.
Water should be free of solids.
Switch will leave 1-2 inches
of water in pit to keep pump primed.
|
| Utility pump on flat surface or laundry tub pump |
HC7000 Electronic Utility Pump Switch
|
Water should be free of solids. Pump will turn on only when
water is detected.
Pump placed on floor or shallow pit.
Pump runs until suction is lost. |
| Sump pump in large pit, high water table, special application |
HC6000
Electronic Hi-Lo Pump Switch
|
No maximum or minimum runtime required.
Set one sensor low, where pump is to turn off.
Set other sensor high, where pump is to turn on.
Water should be free of solids.
|
| Sewage pump in ejector pit or
lift station with solids, paper and other materials in water |
HC5000
Electronic Sewage Pump Switch
|
Set sensor so it is placed below
water inlet.
Set sensor so pit takes no longer than 90 seconds to empty
Switch will leave 1-2 inches of water in pit to keep pump primed.
|
back
to top |
